DIGICER PRIMER 008 is a product based on ethylene and propylene oxide derivatives, designed to be applied to tiles after the glazing process and before inkjet decoration.
Application must be carried out using a highly atomized spray gun to ensure a uniform and even distribution across the glazed surface.<\/p>\n\n\n\n
DIGICER PRIMER 008 effectively reduces vapor pressure, thereby eliminating potential condensation phenomena under the printhead bars.
The product creates a homogeneous surface matrix that is ideal for receiving inkjet decoration. Its mode of action is based on the ability to promote controlled ink absorption into the glazed surface, resulting in enhanced color development and a reduction in printing defects caused by printhead misalignment.<\/p>\n\n\n\n
Chemical basis<\/strong> Chemical & physical specifications<\/strong> Shelf life & packaging<\/strong> DIGICER PRIMER 008 is a product based on ethylene and propylene oxide derivatives, designed to be applied to tiles after the glazing process and before inkjet decoration.Application must be carried out using a highly atomized spray gun to ensure a uniform and even distribution across the glazed surface. DIGICER PRIMER 008 effectively reduces vapor pressure, […]<\/p>\n","protected":false},"featured_media":0,"template":"","product-category":[140],"gamma":[158],"class_list":["post-12727","prodotto","type-prodotto","status-publish","hentry","product-category-primer","gamma-digicer-primer"],"acf":[],"yoast_head":"\n
Mix of ethylene oxide and propylene oxide derivatives.<\/p>\n\n\n\n
APPEARANCE: transparent colorless liquid
SOLUBILITY: water-soluble
DENSITY: 1100-1140 g\/l at 25\u00b0C
pH: 6.5 – 7.5<\/p>\n\n\n\n
12 months when properly stored.
Suggested storage temperature from 5\u00b0C to 35\u00b0C.
Available in drums of 50 Kg and containers of 1000 Kg.<\/p>\n","protected":false},"excerpt":{"rendered":"