Leveling agent for glazes applied over digitally decorated tiles.
In inkjet decoration, the hydrophobic properties of solvent-based inks often hinder the proper flow and leveling of water-based protective glazes. This incompatibility stems from the different polarity of the two systems\u2014polar glazes versus non-polar inks\u2014leading to surface irregularities.<\/p>\n\n\n\n
Digicer TU 203, based on advanced synthetic polymers, overcomes this issue by acting as a compatibilizer, completely neutralizing the water-repellent effect of the glaze on the decoration.
Thanks to its high concentration and strong leveling efficiency, the product delivers excellent results even at very low dosages, which can be gradually adjusted if higher performance is required.<\/p>\n\n\n\n
Chemical basis<\/strong> Chemical & physical specifications<\/strong> Shelf life & packaging<\/strong> Leveling agent for glazes applied over digitally decorated tiles.In inkjet decoration, the hydrophobic properties of solvent-based inks often hinder the proper flow and leveling of water-based protective glazes. This incompatibility stems from the different polarity of the two systems\u2014polar glazes versus non-polar inks\u2014leading to surface irregularities. Digicer TU 203, based on advanced synthetic polymers, overcomes […]<\/p>\n","protected":false},"featured_media":0,"template":"","product-category":[137],"gamma":[159],"class_list":["post-12625","prodotto","type-prodotto","status-publish","hentry","product-category-levelling-agents-defoamers-surfactants","gamma-digicer-tu"],"acf":[],"yoast_head":"\n
Special combination of polymers in solvent solution.<\/p>\n\n\n\n
APPEARANCE: transparent yellow liquid
SOLUBILITY: partially water-soluble
DENSITY: 990-1020 g\/l at 25\u00b0C<\/p>\n\n\n\n
6 months when properly stored.
Suggested storage temperature from 5\u00b0C to 35\u00b0C.
Available in drums of 25 Kg and 50 Kg and tanks of 1000 Kg.<\/p>\n","protected":false},"excerpt":{"rendered":"